Select Page

DCEC C260-20 Automotive Parts

DCEC EQB125-20 automotive engine is a 4-cylinders in line, 4 liter four-strokes engine with 114mm bore and 145mm stroke, equipped with Bosch vp44 and RQV-K governor. DCEC EQB125-20 automotive engine comes with turbocharged and charge air cooled, with a EURO III post-processor.

The prime power at 2800RPM of DCEC EQB125-20 automotive engine is 125HP.

As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC EQB125-20 Automotive Parts

  • Lower oil consumption,Extended stroke,the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.

  • Strong power,advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.

  • Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.

  • Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.

  • Super life, 30% engines 800,000 km without overhaul.

  • Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.

  • Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine. Through the arctic village-MoHe of China-36°C extreme low temperature validation.

Technical Specifications

Advantages of DCEC EQB125-20 Automotive parts

Engine Model: EQB125-20
Engine Type: 6
Displacement: 3.9 L
Rated Speed: 2800 RPM
Rated Power: 92 kW @ 2800 rpm
Peak Torque: 410 N.m @ 1500 rpm
Fuel System: HPCR
Aspiration Method: Turbocharged & Intercooler
Emission Standard: N/A
Bore*Storke: 114 mm * 145 mm
Packing Size(L*W*H): N/A
Wet Weight: 680 kg
Lead Time: 15-30 Working Days
Payment Terms: T/T ,L/C
CCEC-KTA50-Industrial-Engine-
Search by Part No. or Part Name

DCEC EQB125-20 Automotive Engine Parts ------ BRACKET,CABLE

BRACKET,CABLE

NO OPTION NUMBER OPTION NAME QTY REMARKS
1 11DS5-08096-A BOARD,FIXATION 1
2 13Q01-11035 CONNECTOR,TUBE 1
——END——

CCEC KTA50-M2 Industrial Engine Parts ------ Pully,Accessory Drive

PULLY,ACCESSORY DRIVE

No. Part No. Part Name Qty/Eng Remarks
1 3332255 PLUG,GEAR COVER 1 —-
——END——

CCEC KTA50-M2 Industrial Engine Parts ------ Cylinder Block

Cylinder Block

No. Part No. Part Name Qty/Eng Remarks
3648593 BLOCK.CYLINDER 1 —-
1 3648602 BLOCK.CYLINDER 1 —-
2 139990 WASHER,PLAIN 18 —-
3 3176857 DOWEL RING 9 —-
4 3025485 WASHER.PLAIN 18 —-
5 205230 BUSHING 2 —-
6 3628452 SCREW .HEX FLANGE HEAD CAP 18 —-
7 205584 SCREW ,TWELVE POINT CAP 18 —-
8 206587 CAP.MAIN BEARING 7 —-
9 206588 CAP .MAIN BEARING 2 —-
10 3640775 SEAL, TAMPER PROOF 9 —-
11 4016364 DOWEL.PIN 32 —-
12 3629168 PLUG.EXPANSION 8 —-
13 3638583 DRAINCOCK 3 —-
14 4017621 PLUG,EXPANSION 17 —-
15 3645841 PLUG,EXPANSION 16 —-
16 3628605 PLUG.PIPE 6 —-
17 3002993 DOWEL RING 32 —-
18 S 610 WASHER,LOCK 10 —-
19 3628608 PLUG,PIPE 4 —-
20 3628607 PLUG,PIPE 1 —-
21 70662 DOWEL.PIN 2 —-
22 106069 SCREW .HEX FLANGE HEAD CAP 6 —-
23 148582 DOWEL.PIN 2 —-
24 3000138 SUPPORT,BEARING 1 —-
25 3175281 SUPPORT,BEARING 1 —-
26 3175805 BUSHING 32 —-
27 3177443 SCREW.HEX FLANGE HEAD CAP 1 —-
28 205059 WASHER,PLAIN 96 —-
29 205199 SCREW,TWELVE POINT CAP 2 —-
30 3178450 SHAFT,ID LER 1 —-
31 3178457 WASHER,PLAIN 3 —-
32 3033853 SHAFT.IDLER 2 —-
33 3177945 SCREW,HEX FLANGE HEAD CAP 2 —-
34 3032633 SCREW.TWELVE POINT CAP 96 —-
35 205684 BRACKET,LIFTING 4 —-
36 206028 SCREW,SOCKET HEAD CAP 4 —-
37 3631471 ADAPTER ,O RING 6 —-
38 3632840 SEAL,O RING 6 —-
39 3010595 SCREW,CAPTIVE WASHER CAP 12 —-
——END——

Usual Question

What are the advantages of Cummins spare parts?

  • The quality of parts may not be comparable to Cummins original parts. These parts are produced by different manufacturers and quality controls and standards may differ. Using low-quality parts can result in equipment failure, reduced performance, or shortened equipment life.
  • Parts may not exactly match the design of Cummins equipment, causing installation difficulties or improper function. This may affect the performance, reliability and safety of the device.
  • Parts may violate Cummins warranty. Cummins typically only warrants its original parts. If the use of non-original parts causes equipment failure, you may not be eligible for Cummins warranty support.
  • The supply chain of parts may be unstable, making it difficult to ensure reliable supply of parts. This can lead to delays in repairs or inability to obtain needed parts in a timely manner.

How do we accurately purchase parts?

  • You can obtain the Cummins parts that need to be identified through the equipment manual, Cummins official website or contacting Cummins authorized partners.
  • If the required parts have been identified, you need to confirm the part model and specifications. This information can usually be found in the equipment instructions or parts manual.
  • Before buying new parts, you can check the condition of existing parts. This can help you confirm the model and specification of the part you need and avoid purchasing the wrong part.
  • Before purchasing Cummins parts, you need to provide necessary information, such as equipment model, part model and quantity, etc. This helps suppliers serve you better.
  • After confirming the required parts quantity, you can contact us on WhatsApp.
WhatsApp Online logo

Sales Team


Generator Engine - Miss. Stella Zhang

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Kevin Liu

Industrial Engine - Miss. Serena Zhang

Pump Engine - Mr. Joie Zeng

Engine Parts - Mr. Placido Yu

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-parts.com

You have Successfully Subscribed!

Pin It on Pinterest